Industrial Descaler
AquaForce 280
General-purpose descaler for a wide range of waterborne systems
- pH
- ~1.3
- Acidic (pH < 3)
- Dilution
- 1:6 – 1:7
- Range figure
- CIP
- 40–60 °C · 4–8 h
- Range figure
Choose and buy
Select a grade and pack size
| Grade | 500 mL | 5 L | 25 L |
|---|---|---|---|
| AquaForce 280 | |||
| Copper-Safe 264 | |||
| Multi-Purpose 110 | |||
| Vertical Surface |
Selected—
—
Out of stock — closest available
Or ask us to email you when it is back →Published figures
Quoted from Lactaz product copy. A figure marked range is published for the whole Industrial Descaler range rather than for this grade alone. Confirm the correct figure for your system against the current safety data sheet before first use.
| Figure | Value | Scope | Source |
|---|---|---|---|
| pH | ~1.3 Acidic | This grade | ~1.3 |
| Dilution | 1:6 – 1:7 1:7 or 1:6 with water, depending on the product | Range | Dilute 1:7 or 1:6 with water, depending on the product. |
| CIP temperature | 40–60 °C | This grade | 40-60°C |
| CIP duration | 4–8 h | Range | Circulate at 40-60°C for 4-8 hours (CIP systems). |
| Contact time | 15-90 minutes (vertical or manual cleaning) | Range | For vertical or manual cleaning, apply directly with a roller or brush, let sit for 15-90 minutes, and rinse thoroughly. |
What it removes
- Limescale
- Rust
- Cement
- Organic deposits
Where it is used
- Boilers
- Air heaters
- Tanks
- CIP operations in heat exchangers, tanks, and water heaters
Material notes
- Suitable for CIP operations in heat exchangers, tanks, and water heaters.
How to use
- 1Shake well before use.
- 2Dilute 1:7 or 1:6 with water, depending on the product.
- 3Circulate at 40-60°C for 4-8 hours (CIP systems).
- 4For vertical or manual cleaning, apply directly with a roller or brush, let sit for 15-90 minutes, and rinse thoroughly.