Industrial Descaler
Vertical Surface
Viscous gel for vertical surfaces and ceilings
- pH
- <2
- Acidic (pH < 3)
- Dilution
- 1:6 – 1:7
- Range figure
- CIP
- 40–60 °C · 4–8 h
- Range figure
Choose and buy
Select a grade and pack size
| Grade | 500 mL | 5 L | 25 L |
|---|---|---|---|
| AquaForce 280 | |||
| Copper-Safe 264 | |||
| Multi-Purpose 110 | |||
| Vertical Surface |
Selected—
—
Out of stock — closest available
Or ask us to email you when it is back →Published figures
Quoted from Lactaz product copy. A figure marked range is published for the whole Industrial Descaler range rather than for this grade alone. Confirm the correct figure for your system against the current safety data sheet before first use.
| Figure | Value | Scope | Source |
|---|---|---|---|
| pH | <2 Acidic | This grade | <2 |
| Dilution | 1:6 – 1:7 1:7 or 1:6 with water, depending on the product | Range | Dilute 1:7 or 1:6 with water, depending on the product. |
| CIP temperature | 40–60 °C | Range | Circulate at 40-60°C for 4-8 hours (CIP systems). |
| CIP duration | 4–8 h | Range | Circulate at 40-60°C for 4-8 hours (CIP systems). |
| Contact time | 15-90 minutes (vertical or manual cleaning) | Range | For vertical or manual cleaning, apply directly with a roller or brush, let sit for 15-90 minutes, and rinse thoroughly. |
What it removes
- Rust
- Lime scale
- Salt precipitates
Where it is used
- Ceilings
- Vertical surfaces
- Containers
- Pool areas
- Cisterns
- Car wash facilities
Material notes
- Viscous gel for vertical surfaces and ceilings, ensuring maximum adhesion and efficacy.
- Removes rust, lime scale, and salt precipitates on hard-to-clean surfaces.
How to use
- 1Shake well before use.
- 2Dilute 1:7 or 1:6 with water, depending on the product.
- 3For vertical or manual cleaning, apply directly with a roller or brush, let sit for 15-90 minutes, and rinse thoroughly.